Guide on tips to select perfect roller chains – Bolton Engineering Products Ltd

Choosing the proper roller chains for an application is a time-consuming task. The information provided here serves as a starting point, orienting you to the primary topics of emphasis in the choosing process. Starting with two separate bits of information, there are two main techniques for selecting roller chains. The first technique starts with the application’s total rated power, while the second method begins with the maximum permissible load. There are a few critical pieces of information that you must know for either strategy to scale the application effectively. Keep reading to learn in detail!

About Roller Chains

 Roller Chains are available in a wide range of diameters and shapes. Because there is less friction in the flow of electricity, it is smoother and more efficient to use. Roller chains also give pitch-by-pitch drive, essential for synchronized movements such as vehicle and marine camshafts. These can also be found in packaging and printing equipment. The chains are being used by a number of manufacturing industries for different purposes.

Determine the application’s orientation first

Do you know the orientation, whether it is a horizontal conventional linear transmission or a lifting, vertical application? This will have an impact on some of the critical load estimations. There are several other ways to check the orientation of the roller chains.

What is the power to be transmitted next?

These considerations will aid in determining the required diameter and speed of both the driving and driven shafts. You’ll also need to know the center distance, which is the distance between the centers of the driving and driven sprockets.

This constant addresses the transmission capacity of the chain, which is impacted by frequent load fluctuations. The appropriate service factor Ks must be applied based on the power source and machine type. This is essentially the amount of load impact or vibration in the machine.

Choose Perfect Size

Choose a  roller chain size and the number of teeth for the little sprocket on the fly. This is usually done using a table supplied by the manufacturer. Determine the number of teeth for the large sprocket in the same way. This can be calculated using the speed ratio. Take the perfect size to have the exact roller chains needed for your work.

Determine the length

This is a high-level overview of the method. Individual manufacturer websites contain more detailed treatments of the selection process, including tables and graphs that aid in choosing. The length determination helps to get the exact length and size of the roller chains in the best possible way.

Source: Bolton Engineering Products

Leave a Reply